The
most demanding applications require a reliable and robust diesel generator by
Cummins, a globally known manufacturer of alternative fuel generators and
engines that are durable, efficient, and clean. The way it is constructed
minimizes the need for maintenance, so you can expect more uptime to enhance
your productivity. Despite these features, the Cummins diesel generator will
still need to be maintained and serviced from time to time. In fact, proper
maintenance is crucial to expanding the lifespan of the generator. Here are
some tips for taking care of your Cummins generator:
- Schedule routine inspections – The engine, DC electrical system, exhaust system, and fuel system need to be monitored during operation, so leaks can be spotted when they occur, and this incident can be hazardous. You will need to conduct oil changes every 100 hours, too. That way, the Cummins diesel generator can run trouble-free.
- Check the cooling system – When shutting down the generator, remember to check the coolant level at specified intervals. If needed, add more coolant until it reaches a level of about ¾ inches. A heavy-duty Cummins diesel engine will require a balanced mixture of coolant additives, antifreeze, and water for its coolant. Consider checking the radiator’s exterior for any foreign material or obstructions, too, and use a soft cloth or brush to remove them, while being cautious not to damage the fins.
- Make
sure the engine is properly lubricated – Check the engine oil using a dipstick when you
shut down the generator. Follow Cummins’ recommendations for oil viscosity
and API oil classification, and make sure the oil level is as near as it
can to the full mark on the stick. Remember to change the filter and oil
at manufacturer recommended time intervals, too. Cummins has provided the
procedure for draining oil and filter replacements in the manual.
- Drain
the fuel –
Diesel tends to corrode and become contaminated in a span of a year, so it
is recommended that you drain the fuel filters, as water vapor accumulates
and condenses into the fuel tank. You may need to perform fuel polishing
and testing if the generator is used only for stand-by power and has not
been used in three to six months.