Few Tips to Take Proper Care of Cummins Diesel Generator

The most demanding applications require a reliable and robust diesel generator by Cummins, a globally known manufacturer of alternative fuel generators and engines that are durable, efficient, and clean. The way it is constructed minimizes the need for maintenance, so you can expect more uptime to enhance your productivity. Despite these features, the Cummins diesel generator will still need to be maintained and serviced from time to time. In fact, proper maintenance is crucial to expanding the lifespan of the generator. Here are some tips for taking care of your Cummins generator:

• Schedule routine inspections – The engine, DC electrical system, exhaust system, and fuel system need to be monitored during operation, so leaks can be spotted when they occur, and this incident can be hazardous. You will need to conduct oil changes every 100 hours, too. That way, the Cummins diesel generator can run trouble-free. 

• Check the cooling system – When shutting down the generator, remember to check the coolant level at specified intervals. If needed, add more coolant until it reaches a level of about ¾ inches. A heavy-duty Cummins diesel engine will require a balanced mixture of coolant additives, antifreeze, and water for its coolant. Consider checking the radiator’s exterior for any foreign material or obstructions, too, and use a soft cloth or brush to remove them, while being cautious not to damage the fins. 

• Make sure the engine is properly lubricated – Check the engine oil using a dipstick when you shut down the generator. Follow Cummins’ recommendations for oil viscosity and API oil classification, and make sure the oil level is as near as it can to the full mark on the stick. Remember to change the filter and oil at manufacturer recommended time intervals, too. Cummins has provided the procedure for draining oil and filter replacements in the manual.
  
  
• Drain the fuel – Diesel tends to corrode and become contaminated in a span of a year, so it is recommended that you drain the fuel filters, as water vapor accumulates and condenses into the fuel tank. You may need to perform fuel polishing and testing if the generator is used only for stand-by power and has not been used in three to six months.